- Control Valves - Stainless Steel
- 920 Series - Pressure Relief, Sustaining or Backpressure
Stainless Steel Pressure Sustaining or Backpressure Control Valve with Hydraulic Check Feature
Lead Free* Models Available
4 to 16 in. (100 to 400mm)
Designed to permit flow when upstream pressure is above the adjustable setpoint of the control pilot, and throttle when upstream pressure falls below the adjustable setpoint. The valve closes drip-tight when downstream pressure becomes greater than upstream pressure.
When installed "in line" on the discharge of a pump, the valve acts as Backpressure Control and Check Valve. When pump discharge pressure falls below the pilot setting the valve throttles to increase backpressure against the pump. When the pump is turned off, the valve acts as a Hydraulic Check Valve, preventing reverse flow.
When installed "in line" connecting two distribution zones, the valve acts as a Pressure Sustaining Control Valve. When upstream pressure falls below the pilot setting the valve throttles to sustain pressure in the upstream zone, and closes drip-tight when downstream pressure becomes greater than upstream pressure.
To preview and download CAD Drawings for this product, please select a model/size from the list.
Disclaimer: Ames product dimensions in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames Technical Service. Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Ames products previously or subsequently sold.
Please Note: Ames Fire & Waterworks literature requires Adobe Acrobat Reader to view.
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.